Tethered Electrical Tool Kits
The most Important word In the LHR vocabulary is "Safety". We are constantly looking for areas where the safety
of our customers can be improved. One need we found to be Important to our customers was the need to Improve the level of
safety Involved In working with tools In overhead applications. Because of this LHR developed the TTK-18 Tethered Tool Kit.
The LHR TTK-18 is a comprehensive tool kit that offers 100% tie-off protection. This tool kit includes 18 of the most
popular and common tools found in offshore drilling and other industrial applications. The tools come with strong nylon
double-legged lanyards with either standard aluminum alloy snap hooks or optional stainless steel snap hooks. The most
important characteristic of this kit is its ability to provide complete, 100% tie-off protection. This means that, if
used properly, the tools in the TTK-18 tool kit should never be dropped causing a hazardous situation. This tool kit
helps to promote a safer, less hazardous working environment.
The TTK-18 100% Tie-off tool kit comes complete with the following tools:
| PART NO. |
DESCRIPTION |
| |
|
| TT-DHLAN |
Double Hook Hoisting Lanyard |
| TT-FHPH |
Flat/Phillip Head Screw Driver Lanyard |
| TT-28PB |
28" Pry Bar Lanyard |
| TT-15CW |
15" Crescent Wrench Lanyard |
| TT-24APW |
24" Aluminum Pipe Wrench Lanyard |
| TT-5LBDBH |
5 lb. Dead Blow Hammer Lanyard |
| TT-10LBDBH |
10 lb. Dead Blow Hammer Lanyard |
| TT-3125BW |
1-5/16" x 1-1/4” Box Wrench Lanyard |
| TT-25BW |
1-1/4" x 1-1/16” Box Wrench Lanyard |
| TT-125BW |
1-1/8" x 1-1/16” Box Wrench Lanyard |
| TT-1BW |
1" x 15/16” Box Wrench Lanyard |
| TT-875BW |
7/8" x 3/4” Box Wrench Lanyard |
| TT-4375-75BW |
6PC Multi-Box Wrench Lanyard (7/16" - 3/4") |
| TT-GG12 |
Heavy Duty Grease Gun Lanyard, w/ 12" Stiff Tip |
| TT-C2276D |
Strapping Tape Lanyard, 1/4" x 100ft |
| TT-PPS |
|
| TT-BOX |
Tether Tool Storage Box |
As with all of the products LHR offers, this tool kit is designed for, but not specifically limited to, the offshore
drilling Industry. However, the TTK-18 can and should be used in any commercial or industrial applications that require
overhead use of these tools. The LHR TTK-18 100% Tie-Off Tool Kit should be used anyplace when the tools are being used
overhead high off the ground. Any situation that requires workers to use these tools while other workers are below should
employ these 100% tie-off tools. With 100% tie-off protection, a tool should never be dropped and put anyone's
safety in danger.
Another concept that we at LHR believe improves our customers' safety is customization. Through customization we can
achieve higher levels of safety by tailoring our products to meet the specific needs of the user. With this in mind, we
offer two different snap-hook options for the TTK-18 tools. Customers may choose from an aluminum allow snap hook or a
stainless steel snap hook. LHR can also have additional tools tethered to meet your specific job requirements.
For more information on the Tethered Tool Kit please fill out the form below or call us at 713-943-2324.
|
